Laminated Safety Glass

Laminated Safety Glass

Bespoke laminated safety glass with PVB or ionoplast interlayers for fragment retention, acoustic options and architectural applications. Available in clear, decorative and toughened laminated configurations, including suitable insulating glass units.

Laminated glass for safety, sound control and design flexibility

Trent Glass supplies bespoke laminated glass for homes, commercial interiors and architectural projects. Two or more panes are bonded with one or more polymer interlayers, typically PVB (polyvinyl butyral) or a specified ionoplast interlayer such as SGP. The assembly is de-aired and bonded under controlled heat and pressure to form a single composite panel.

If the glass breaks, the interlayer helps retain fragments and reduce the risk of falling or flying pieces. The appropriate glass thickness, interlayer and support system depend on the application: laminated glass can still break, and its ability to remain in place after breakage must be assessed for the proposed installation.

Why choose laminated glass?

Safer breakage and security options

Fragment retention makes laminated safety glass useful for doors, low-level glazing, partitions and suitably designed overhead glazing. Specialist constructions can provide additional resistance to penetration or manual attack. Security, blast resistance and fire resistance are separate tested performance requirements; ordinary laminated safety glass should not be described as explosion-proof or fire-rated.

Sound control for UK homes and workplaces

For properties near busy roads, railways or other noise sources, an acoustic PVB interlayer and carefully selected pane thicknesses can improve sound insulation. Laminated panes can also be incorporated into double- or triple-glazed units. Ask for the tested acoustic rating of the exact glass build-up: there is no universal 35 dB rating, and the frame, seals and installation affect the completed window’s performance.

UV screening

Suitable interlayers can screen a high proportion of ultraviolet radiation, helping reduce one cause of fading in furniture, fabrics and flooring. The UV transmission depends on the specified interlayer and glazing construction; confirm the product data rather than assuming a 99% figure applies to every option. Visible light and heat can also contribute to fading.

Clear, tinted, frosted and decorative finishes

Options include clear and tinted glass, frosted finishes and decorative or coloured interlayers, subject to the proposed construction. We can discuss toughened laminated glass for additional strength, shaped panels, curved laminated glass and laminated panes within insulating glass units. Feasibility, dimensions, edge treatment, holes and cut-outs are agreed before manufacture; toughened panes cannot be cut or drilled afterwards.

UK specification and safety standards

BS EN 12600 provides the pendulum impact test and classification used when specifying safety glazing. BS EN 14449 is the product standard for laminated glass and laminated safety glass, while the BS EN ISO 12543 series covers relevant definitions, requirements and test methods. Request the classification and supporting documentation for the exact supplied construction; the word “laminated” alone does not establish suitability for every safety application.

In England, Approved Document K gives guidance on protection against impact with glazing in critical locations, including doors and low-level glazing. Wales, Scotland and Northern Ireland have their own applicable building regulations and guidance. Your designer or installer should confirm the requirements for the project location.

Balustrades, structural glazing and overhead panels need a project-specific assessment of loading, fixings, support and behaviour after breakage. Where enhanced security is required, specify the relevant tested security classification rather than relying on glass thickness alone.

Made to your specification

Send us your dimensions or drawings, quantity, intended use, preferred finish and any acoustic, structural or security requirements. We will discuss the glass and interlayer options and the documentation needed for the proposed product. Our focus is product supply, and we can coordinate with your local installer.

Explore toughened glass, shaped glass, curved glass and tinted, frosted and patterned glass.

Laminated glass details

Recreated product images show the bonded glass layers and finished panel edges. Final thickness, appearance and construction are agreed with your order.

Laminated glass sample showing two bonded glass panes and the thin interlayer
Laminated glass sample showing two bonded glass panes and the thin interlayer
Stack of laminated glass panels with polished edges and protective separators
Stack of laminated glass panels with polished edges and protective separators